Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It is discrete, does not use LED indicators or key fobs, and is hidden within the vehicle's wiring.
The user can also disable the system temporarily by using Transport Mode when renting out their vehicle. This guide will take you through the steps of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle from hacking, key cloning, and relay attacks. The system is connected directly to the ECU of your car and protected by a pin code that you choose. It is not detected by thieves using diagnostic scanners or other advanced methods. It is not able to be disabled by cutting circuits.
The system is easy to use, however it's essential to use a an expert installation to ensure a clean and secure connection to your vehicle's ECU. Installers approved by Thatcham can assist with the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complete your vehicle's protection package.
To prevent an accidental deployment of short circuits or airbags The installer must first remove your battery. Once this is done, the installer can safely begin work. Hand tools are the most basic to be used to make precise connections. A multimeter is a great tool to check electrical values. Cable tie and insulation tape are essential to protect connections and keep wiring tidy. The user's manual provides specific guidance tailored to your Ghost Immobiliser model.
It is essential to choose a grounding location that is free of dirt or paint during installation. The installer should ensure that the immobiliser's CAN H and CAN L wires are connected to the correct ports on your vehicle's ECU. Based on the model, these wires may require soldering or plugged into. To ensure a secure and long-lasting connection, it is recommended that you choose a top-quality plug.
Transport Mode can be activated by the client after the installation is complete. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. The customer must press the icon for service on the dashboard five times over two seconds. The system will confirm this by showing five indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a great choice for those who rent their vehicles regularly through platforms like Turo. Having an immobiliser can also lower insurance costs, as it greatly reduces the chance of theft.
Getting Started
You can't go far wrong using an autowatch immobiliser if you want to protect your car from theft. The device protects your vehicle from starting even the theft or copies the key. It's possible due to its advanced technology, which prevents the engine from starting until the correct PIN code is entered.
The device connects to the vehicle's bus system CAN, allowing direct communication with the ECU. please click the next internet page uses buttons that are already present on the dashboard and wheel to create a unique sequence that only you can identify and makes it impossible for others to start your car. This is the best security system that protects your pride and joy and will ensure its value should you decide to sell it in the future.
Installing a Ghost immobiliser is easy, but you must follow the directions to avoid electrical issues and malfunctions of the system. You'll need to locate a power supply of 12V and a solid grounding on the car's chassis. Then, you can begin to connect the wires for the immobiliser. Use high-quality connectors, and soldering techniques to ensure a solid connection. Also, make sure to insulate the connections by using heat shrink tubing or insulation tape to shield them from electrical short circuits and other problems.
Once the wires are connected, you are able to connect the battery and start the engine to test if the immobiliser is working. Once you have verified that everything is functioning properly, you can install the immobiliser in a safe place inside the vehicle. Be sure to cover it in a secure manner to prevent a thief from tampering with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it's a top-quality deterrent for car thieves. It is invulnerable to key cloning and hacking and cannot be disabled without a code. The device is also easy to use and is able to be put into the service valet mode to ensure that your car isn't activated if you take it in for service or an MOT.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It communicates with your vehicle's ECU and directly connects to its CAN bus. Ghost Immobiliser doesn't interfere with the factory settings of your car, unlike other aftermarket systems that require the removal of circuit elements.
The system is also undetectable by thieves using diagnostic scanning tools. This is because the system doesn't send and receive radio frequency signals and it uses the CAN data format to communicate with your ECU. It doesn't require any modifications to your existing key fobs.
To make use of the Ghost Immobiliser simply turn on your car's ignition and enter your disarm sequence (either one or two buttons). The indicator will flash two times to confirm that you have entered the correct code. Once you've verified this, you're able to start your car and drive away with peace of mind.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning while protecting its value. If you have to surrender your vehicle for service or valet parking The Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need to identify an energy source that is constant (12V) and an earthing point. Ensure that these are both well-insulated and safe to touch. Cable ties are also recommended to secure the wires. This reduces the possibility of theft by thieves. Make sure you check the exact location of these points to avoid committing a mistake and mark them with a piece of tape or label. It's important to inspect all connections for signs wear and tear. Make sure all connections are firmly in place, and are properly protected. Also, don't forget test the Ghost Immobiliser after installation is complete. This will confirm that the unit functions properly and that all connections and insulation are secure. Be sure to fix any problems immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that seamlessly into your car's ECU to block unauthorised engine start. The innovative technology it uses protects your car from key cloning, hacking, and other common tactics that thieves employ to steal cars. The Ghost works in conjunction with existing alarm and tracking systems to offer the ultimate security for your vehicle. The Ghost's unmatched features, paired with its subtle design makes it a preferred choice for drivers who love cars and security-conscious drivers.
To ensure proper integration of the Ghost Immobiliser, it is essential to follow all steps of the installation process. Consult the wiring diagram for the vehicle as it will assist you in locating and connecting the wires. After that, you'll need identify the power source as well as grounding points. Once you've located them, you'll need to mark the points to make them easy to identify when installing. It is essential to use top-quality materials and tools. Basic hand tools can help in making connections that are precise and a multimeter can confirm electrical values and guarantee safety. Cable tie and insulation tape will ensure that all connections are tidy. Additionally, a user's manual will provide specific instructions tailored to your Ghost model.
It is essential to test the system prior installing it. Enter the PIN code into the system, and then start the vehicle. This step will confirm the immobiliser is working as it should and will stop vehicle starts that are not authorized. It's recommended to perform this routinely as part of your routine inspections of your vehicle to ensure that the system is always functioning properly.
After the installation is completed After the installation is completed, you are able to drive your vehicle with confidence. The Ghost will keep your car and its contents safe from potential thieves and ensure that no one can drive off with your vehicle without the correct PIN. The Ghost can be paired with an approved Thatcham tracker, which detects attempts to steal or tamper with. This will allow you to track your car in the event that it's stolen.
The Ghost can be used on a variety of vehicles and is compatible with most major manufacturers. If you're interested in protecting your car using this advanced device, contact Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, which guarantees we follow strict standards in the installation of our products. how much is a ghost immobiliser reassures customers, insurers, and law enforcement that installations are done safely and correctly.